通达信笔底分型主图指标公式

㈠ 请老师帮忙改写通达信底分型公式

V00:= HIGH<REF(HIGH,1) AND LOW<REF(LOW,1);

V01:= HIGH<REF(HIGH,1) AND LOW>REF(LOW,1);

V02:= HIGH>REF(HIGH,1) AND LOW<REF(LOW,1);

忽略以上。 对于你抄的问题，有疑问，要求中间涨幅，你的公式信号出现前，还是出现后？

㈡ 求通达信主图指标公式

X0:=BACKSET(REF(C,3)<MA(C,3) AND REF(V,3)>MA(V,3) AND REF(C/REF(C,1)>1.03 AND C>O,3),4);

X1:=X0 AND REF(X0,1)=0;

STICKLINE(X1,H,C,0,0),COLORFF0080;

STICKLINE(X1,O,C,3,0),COLORFF0080;

STICKLINE(X1,L,O,0,0),COLORFF0080;

X3:=BACKSET(LLV(L,3)>REF(C,3) AND REF(X1,3),4);

STICKLINE(X3,REF(C,BARSLAST(X1)),REF(C,BARSLAST(X1)),5,0),COLORFF0080;

X5:=BACKSET(LLV(L,3)<REF(O,3) AND REF(X1,3),4);

STICKLINE(X5,REF(L,BARSLAST(X1)),REF(L,BARSLAST(X1)),5,0),COLORFF0080;

㈢ 求通达信缠论精确笔主图画线公式

G:=MA(C,5);
D:=MA(C,10);
HH:=REF(H,5)=HHV(H,11);
LL:=REF(L,5)=LLV(L,11);
FG01:=BACKSET(HH,6)>BACKSET(HH,5) ;
FD01:=BACKSET(LL,6)>BACKSET(LL,5) ;
FG02:=IF(BARSLAST(FG01)=BARSLAST(FD01) AND G>D,FG01,
IF(BARSLAST(FD01)>BARSLAST(FG01),FG01,0));
FD02:=IF(BARSLAST(FG01)=BARSLAST(FD01) AND D>G,FD01,
IF(BARSLAST(FG01)>BARSLAST(FD01),FD01,0));
FG0:=FG02 AND H=HHV(H,BARSLAST(FD02));
FD0:=FD02 AND L=LLV(L,BARSLAST(FG02));
GP:=IF(FG0,H,DRAWNULL),CIRCLEDOT,COLORCYAN;
DP:=IF(FD0,L,DRAWNULL),CIRCLEDOT,COLORCYAN;
GQ:=L>REF(H,1) AND DAY!=REF(DAY,1);
DQ:=H<REF(L,1) AND DAY!=REF(DAY,1);
GQL:=REF(L,BARSLAST(GQ));
DQH:=REF(H,BARSLAST(DQ));
FGH:=REF(H,BARSLAST(FG0));
FGL:=REF(L,BARSLAST(FG0));
FGH1:=REF(H,BARSLAST(FG0)+1);
FGL1:=REF(L,BARSLAST(FG0)+1);
FGH2:=REF(H,BARSLAST(FG0)+2);
FGL2:=REF(L,BARSLAST(FG0)+2);
FDH:=REF(H,BARSLAST(FD0));
FDL:=REF(L,BARSLAST(FD0));
FDH1:=REF(H,BARSLAST(FD0)+1);
FDL1:=REF(L,BARSLAST(FD0)+1);
FDH2:=REF(H,BARSLAST(FD0)+2);
FDL2:=REF(L,BARSLAST(FD0)+2);
FGZH:=IF(FGL<=FGL1,FGH2,FGH1);
FGZL:=IF(FGH1<FGL,FGL,IF(FGL<=FGL1,FGL2,FGL1));
FDZH:=IF(FDL1>FDH,FDH,IF(FDH>=FDH1,FDH2,FDH1));
FDZL:=IF(FDH>=FDH1,FDL2,FDL1);
FG1:=FGH>FDZH AND FG0;
FD1:=FDL<FGZL AND FD0;
FG:=FG1 AND FGH>FDH AND FGL>FDL AND FGL1>FDL;
FD:=FD1 AND FDL<FGL AND FDH<FGH AND FDH1<FGH;
BH0:=(H<=REF(H,1) AND L>=REF(L,1)) OR (H>=REF(H,1) AND L<=REF(L,1));
BHG:=COUNT(BH0,BARSLAST(FD0));
BHD:=COUNT(BH0,BARSLAST(FG0));
BGQ:=COUNT(GQ,BARSLAST(FD0));
BDQ:=COUNT(DQ,BARSLAST(FG0));
BK0:=IF(BHG>0,BHG+2+1,IF(BHD,BHD+2+1,3));
BK:=IF(BGQ,BK0-BGQ,IF(BDQ,BK0-BDQ,BK0));
G1X:=(FG AND BARSLAST(FD)>BK);
D1X:=(FD AND BARSLAST(FG)>BK);
G1:=(FG0 AND REF(H,BARSLAST(FG0))>=REF(H,BARSLAST(G1X)) AND BARSLAST(D1X)>BARSLAST(G1X))
OR (FG1 AND COUNT(GQ,BARSLAST(FD1))>0 AND REF(H,BARSLAST(FG1))>REF(H,BARSLAST(G1X)));
D1:=(FD0 AND REF(L,BARSLAST(FD0))<=REF(L,BARSLAST(D1X)) AND BARSLAST(G1X)>BARSLAST(D1X))
OR (FD1 AND COUNT(DQ,BARSLAST(FG1))>0 AND REF(L,BARSLAST(FD1))<REF(H,BARSLAST(D1X)));
G1H:=IF(BARSLAST(D1)>BARSLAST(G1),REF(H,BARSLAST(G1)),REF(H,BARSLAST(D1))),;
D1L:=IF(BARSLAST(G1)>BARSLAST(D1),REF(L,BARSLAST(D1)),REF(L,BARSLAST(G1)));
G2:=G1 AND H=HHV(G1H,BARSLAST(D1)+1) AND H>REF(H,1) AND BARSLAST(D1)>BARSLAST(G1);
D2:=D1 AND L=LLV(D1L,BARSLAST(G1)+1) AND L<REF(L,1) AND BARSLAST(G1)>BARSLAST(D1);
G3:=G2 OR (FG0 AND REF(H,BARSLAST(FG0))>REF(H,BARSLAST(G2)) AND BARSLAST(D2)>BARSLAST(G2));
D3:=D2 OR (FD0 AND REF(L,BARSLAST(FD0))<REF(L,BARSLAST(D2)) AND BARSLAST(G2)>BARSLAST(D2));
GPB:=IF(G1X,H,DRAWNULL),CIRCLEDOT,COLORYELLOW;
DPB:=IF(D1X,L,DRAWNULL),CIRCLEDOT,COLORYELLOW;
{画线}
NN:=G3;
UU:=D3;
L1:DRAWLINE(UU,L,NN, H,0),COLORYELLOW,DOTLINE;
L2:DRAWLINE(NN,H,UU, L,0),COLORWHITE,DOTLINE;

㈣ 通达信公式如何在底分型信号出现后划一横线

L1:IF(CURRBARSCOUNT<=CONST(SUMBARS(XG,1)+1),CONST(REF(L,SUMBARS(XG,1))),DRAWNULL),COLORYELLOW,DOTLINE;
L2:IF(CURRBARSCOUNT<=CONST(SUMBARS(XG,2)+1),CONST(REF(L,SUMBARS(XG,2))),DRAWNULL),COLORYELLOW;
L3:IF(CURRBARSCOUNT<=CONST(SUMBARS(XG,3)+1),CONST(REF(L,SUMBARS(XG,3))),DRAWNULL),COLORYELLOW,LINETHICK2;

㈤ 求老师们帮忙写个通达信底分型的选股公式

给你写个简单的底分型思路：
VARZ:L>REF(L,1) AND REF(L,1)<REF(L,2);
可以关注我，有问题再交流。

㈥ 哪位帮忙一下，把通达信的缠论分笔及中枢主图指标公式 改成大智慧也可以用的

同花顺缠论分笔及中枢主图指标公式

KU1:=IF(HIGH=HHV(HIGH,3),1,0);
KD1:=IF(LOW=LLV(LOW,3),1,0);
UL:=IF(REF(KU1,2)=1 AND REF(KU1,1)=0
AND KU1=0,REF(HIGH,2),REF(HIGH,2+BARSLAST(REF(KU1,2)=1
AND REF(KU1,1)=0 AND KU1=0)));
DL:=IF(REF(KD1,2)=1 AND REF(KD1,1)=0 AND KD1=0,REF(LOW,2),REF(LOW,2+BARSLAST(REF(KD1,2)=1
AND REF(KD1,1)=0 AND KD1=0)));
HV:=H>UL AND H>REF(H,1) ;
LV:=L<DL AND L<REF(L,1) ;
GP:=BARSLAST(HV);
DP:=BARSLAST(LV);
IP:=IF(GP=0,DP,GP)>3;
HV1:=HV AND IP AND H>=HHV(H,BARSLAST(LV));
LV1:=LV AND IP AND L<=LLV(L,BARSLAST(HV));
DRAWLINE(LV1,LOW,HV1, HIGH,0),coloryellow,LINETHICK2;
DRAWLINE(HV1,HIGH,LV1, LOW,0),colormagenta,LINETHICK2;
///加入中枢判定
//简化版
N1:=10;N2:=10;DISP:=2;K:=1;
P1:=PEAK(1,K*N1,1);
P2:=PEAK(1,K*N1,2);
WP1:=PEAKBARS(1,K*N1,1);
WP2:=PEAKBARS(1,K*N1,2);
T1:=TROUGH(2,K*N2,1);
T2:=TROUGH(2,K*N2,2);
WT1:=TROUGHBARS(2,K*N2,1);
WT2:=TROUGHBARS(2,K*N2,2);
TJ1:=P1>T1 AND P2>T2 ;
ZD:=MAX(T1,T2);
ZG:=MIN(P1,P2);
LL:=MIN(T1,T2);
HH:=MAX(P1,P2);
TJ2:=FILTER(ZG>ZD,2);
TJ3:=ZG=REF(ZG,BARSLAST(TJ2)) OR ZD=REF(ZD,BARSLAST(TJ2));
TJ4:=TJ1 AND TJ2 AND NOT(TJ3);
TJ5:=BETWEEN(ZD,REF(ZD,REF(BARSLAST(TJ4),1)),REF(ZG,REF(BARSLAST(TJ4),1)));
TJ6:=BETWEEN(ZG,REF(ZD,REF(BARSLAST(TJ4),1)),REF(ZG,REF(BARSLAST(TJ4),1)));
TJ7:=ZG>REF(ZG,REF(BARSLAST(TJ4),1)) AND ZD<REF(ZD,REF(BARSLAST(TJ4),1));
TJ8:=TJ4 AND NOT(TJ5 OR TJ6 OR TJ7);
ZSD:=IF(TJ8,ZD,REF(ZD,1));//,coloryellow;
ZSG:=IF(TJ8,ZG,REF(ZG,1));//,colormagenta;
ZSH:=IF(TJ8,HH,REF(HH,1));//,colorblue;
ZSL:=IF(TJ8,LL,REF(LL,1));//,colorgreen;
STICKLINE(TJ8,ZSH,ZSL,0,-1),colormagenta;
STICKLINE(TJ8,ZSD,ZSG,IF(DISP=1,3,0),1),colormagenta;
DRAWTEXT(DISP=2,ZSH,),colorwhite;
//中枢高
中枢高:ZSG,colormagenta;
POLYLINE(DISP=2,REF(ZSG,BARSLAST(TJ8))),CIRCLEDOT,colormagenta;
//中枢低:
中枢低:ZSD,coloryellow;
POLYLINE(DISP=2,REF(ZSD,BARSLAST(TJ8))),CIRCLEDOT,coloryellow;
//中枢最高:
中枢最高:ZSH,colorred;
POLYLINE(DISP=2,REF(ZSH,BARSLAST(TJ8))),POINTDOT,colorred;
//中枢最低:
中枢最低:ZSL,colorgreen;
POLYLINE(DISP=2,REF(ZSL,BARSLAST(TJ8))),POINTDOT,colorgreen;
//趋势高:
//QSGD1:POLYLINE(DISP=3,ZIG(1,K*N1)),colorblue;
//趋势低:
//QSDD1:POLYLINE(DISP=3,ZIG(2,K*N2)),colorblue;
MA5:MA(CLOSE,5),COLORFF00FF,Linethick1;
//COLORFF00FF,LINETHICK2;
命真好:=MA5>REF(MA5,1);
命真坏:=MA5<REF(MA5,1);
//判定:
PARTLINE(MA5,命真好,coloryellow,命真坏,colorblue,MA5,COLORFF00FF),linethick3;
//F1:IF(MA5<REF(MA5,1),MA5,NULL),colorwhite,LINETHICK2;

㈦ 通达信精准顶底主图指标公式如何使用

你好 各个软件所用函数不一样 请问你用的哪个呢？另需要把 书中所表述内告诉我 才行=====实在不好容意思 我只能根据他书中的意思 自己猜测了一个 编出来后 感觉是个反指标另外 感觉（5，10）效果不好 自己换成了（12，9）你可以在改过来通达信公式：V1:=EMA(EMA(VOL,12),12);VOL1:(V1-REF(V1,1))/REF(V1,1)*100;MVOL:MA(VOL1,9);

㈧ 有通达信顶底分型公式的朋友么

顶:=BBI+3*STD(BBI,13),COLOR004AFF;
底:=BBI-3*STD(BBI,13),COLOR67FF00;
DRAWBAND(BBI,RGB(97,95,00),顶,RGB(97,95,00));
DRAWBAND(BBI,RGB(25,75,150),底,RGB(25,75,250));
{MA1:MA(CLOSE,M1);
MA2:MA(CLOSE,M2),COLORGREEN;
MA3:MA(CLOSE,M3),COLORRED;
MA4:MA(CLOSE,M4),COLORYELLOW;}
KU1:=IF(HIGH=HHV(HIGH,3),1,0);
KD1:=IF(LOW=LLV(LOW,3),1,0);
UL:=IF(REF(KU1,2)=1 AND REF(KU1,1)=0
AND KU1=0,REF(HIGH,2),REF(HIGH,2+BARSLAST(REF(KU1,2)=1
AND REF(KU1,1)=0 AND KU1=0)));
DL:=IF(REF(KD1,2)=1 AND REF(KD1,1)=0
AND KD1=0,REF(LOW,2),REF(LOW,2+BARSLAST(REF(KD1,2)=1
AND REF(KD1,1)=0 AND KD1=0)));
HV:=H>UL AND H>REF(H,1) ;
LV:=L<DL AND L<REF(L,1) ;
GP:=BARSLAST(HV);
DP:=BARSLAST(LV);
IP:=IF(GP=0,DP,GP)>3;
HHV1:=HV AND IP AND H>=HHV(H,BARSLAST(LV));
LV1:=LV AND IP AND L<=LLV(L,BARSLAST(HV));
DRAWLINE(LV1,LOW,HHV1, HIGH,0),COLORYELLOW,LINETHICK2;
DRAWLINE(HHV1,HIGH,LV1, LOW,0),COLORMAGENTA,LINETHICK2;
STICKLINE(CLOSE> REF(CLOSE,1) ,HIGH,LOW,0,1 ),COLORRED;
STICKLINE(CLOSE> REF(CLOSE,1) ,OPEN,CLOSE,3,0 ),COLOR000055;
STICKLINE(CLOSE> REF(CLOSE,1) ,OPEN,CLOSE,2.7,0 ),COLOR000077;
STICKLINE(CLOSE> REF(CLOSE,1) ,OPEN,CLOSE,2.1,0 ),COLOR000099;
STICKLINE(CLOSE> REF(CLOSE,1) ,OPEN,CLOSE,1.5,0 ),COLOR0000BB;
STICKLINE(CLOSE> REF(CLOSE,1) ,OPEN,CLOSE,0.9,0 ),COLOR0000DD;
STICKLINE(CLOSE> REF(CLOSE,1) ,OPEN,CLOSE,0.3,0 ),COLOR0000FF;
STICKLINE(CLOSE= REF(CLOSE,1) ,HIGH,LOW,0,1 ),COLORWHITE;
STICKLINE(CLOSE= REF(CLOSE,1) ,OPEN,CLOSE,3,0 ),COLOR555555;
STICKLINE(CLOSE= REF(CLOSE,1) ,OPEN,CLOSE,2.7,0 ),COLOR777777;
STICKLINE(CLOSE= REF(CLOSE,1) ,OPEN,CLOSE,2.1,0 ),COLOR999999;
STICKLINE(CLOSE= REF(CLOSE,1) ,OPEN,CLOSE,1.5,0 ),COLORBBBBBB;
STICKLINE(CLOSE= REF(CLOSE,1) ,OPEN,CLOSE,0.9,0 ),COLORDDDDDD;
STICKLINE(CLOSE= REF(CLOSE,1) ,OPEN,CLOSE,0.3,0 ),COLORFFFFFF;
STICKLINE(CLOSE< REF(CLOSE,1) ,HIGH,LOW,0,1 ),COLORCYAN;
STICKLINE(CLOSE< REF(CLOSE,1) ,OPEN,CLOSE,3,0 ),COLOR990000;
STICKLINE(CLOSE< REF(CLOSE,1) ,OPEN,CLOSE,2.7,0 ),COLORCC0000;
STICKLINE(CLOSE< REF(CLOSE,1) ,OPEN,CLOSE,2.1,0 ),COLORFF4400;
STICKLINE(CLOSE< REF(CLOSE,1) ,OPEN,CLOSE,1.5,0 ),COLORFF8800;
STICKLINE(CLOSE< REF(CLOSE,1) ,OPEN,CLOSE,0.9,0 ),COLORFFCC00;
STICKLINE(CLOSE< REF(CLOSE,1) ,OPEN,CLOSE,0.3,0 ),COLORCYAN;
{笔底分型 选股 预警 确保向下笔成立后的底分型}
V00:= HIGH<REF(HIGH,1) AND LOW<REF(LOW,1);
V01:= HIGH<REF(HIGH,1) AND LOW>REF(LOW,1);
V02:= HIGH>REF(HIGH,1) AND LOW<REF(LOW,1);
V03:= HIGH>REF(HIGH,1) AND LOW>REF(LOW,1);
V04:= REF(HIGH,2) < HIGH AND REF(LOW,2) < LOW
AND REF(HIGH,2) > REF(HIGH,1) AND REF(LOW,2) < REF(LOW,1);
V1:= COUNT(V00,6)>=3 AND COUNT(V01 OR V02,5)=0 AND LLVBARS(LOW,6) = 1 AND HHVBARS(HIGH,6) >= 5 AND V03;
V2:= COUNT(V00,7)>=3 AND COUNT(V01 OR V02,6)=1 AND LLVBARS(LOW,7) = 2 AND HHVBARS(HIGH,7) >= 6 AND V04;
V3:= COUNT(V00,7)>=3 AND COUNT(V01 OR V02,6)=1 AND LLVBARS(LOW,7) = 1 AND HHVBARS(HIGH,7) >= 6 AND V03;
V4:= COUNT(V00,8)>=3 AND COUNT(V01 OR V02,7)<=2 AND LLVBARS(LOW,8) = 2 AND HHVBARS(HIGH,8) >= 7 AND V04;
V5:= COUNT(V00,8)>=3 AND COUNT(V01 OR V02,7)<=2 AND LLVBARS(LOW,8) = 1 AND HHVBARS(HIGH,8) >= 7 AND V03;
V6:= COUNT(V00,9)>=3 AND COUNT(V01 OR V02,8)<=3 AND LLVBARS(LOW,9) = 2 AND HHVBARS(HIGH,9) >= 8 AND V04;
V7:= COUNT(V00,9)>=3 AND COUNT(V01 OR V02,8)<=3 AND LLVBARS(LOW,9) = 1 AND HHVBARS(HIGH,9) >= 8 AND V03;
V8:= COUNT(V00,10)>=3 AND COUNT(V01 OR V02,9)<=4 AND LLVBARS(LOW,10) = 2 AND HHVBARS(HIGH,10) >= 9 AND V04;
V9:= COUNT(V00,10)>=3 AND COUNT(V01 OR V02,9)<=4 AND LLVBARS(LOW,10) = 1 AND HHVBARS(HIGH,10) >= 9 AND V03;
V10:= COUNT(V00,11)>=3 AND COUNT(V01 OR V02,10)<=5 AND LLVBARS(LOW,11) = 2 AND HHVBARS(HIGH,11) >= 10 AND V04;
XG:= V1 OR V2 OR V3 OR V4 OR V5 OR V6 OR V7 OR V8 OR V9 OR V10;
DRAWTEXT(FILTER(XG=1,5),L*0.97,'底分型');
{笔顶分型 选股 预警 确保向上笔成立后的顶分型}
HV00:= HIGH>REF(HIGH,1) AND LOW>REF(LOW,1);
HV01:= HIGH<REF(HIGH,1) AND LOW>REF(LOW,1);
HV02:= HIGH>REF(HIGH,1) AND LOW<REF(LOW,1);
HV03:= HIGH<REF(HIGH,1) AND LOW<REF(LOW,1);
HV04:= REF(HIGH,2) > HIGH AND REF(LOW,2) > LOW AND REF(HIGH,2) > REF(HIGH,1) AND REF(LOW,2) < REF(LOW,1);
HV1:= COUNT(HV00,6)>=3 AND COUNT(HV01 OR HV02,5)=0 AND HHVBARS(HIGH,6) = 1 AND LLVBARS(LOW,6) >= 5 AND HV03;
HV2:= COUNT(HV00,7)>=3 AND COUNT(HV01 OR HV02,6)=1 AND HHVBARS(HIGH,7) = 2 AND LLVBARS(LOW,7) >= 6 AND HV04;
HV3:= COUNT(HV00,7)>=3 AND COUNT(HV01 OR HV02,6)=1 AND HHVBARS(HIGH,7) = 1 AND LLVBARS(LOW,7) >= 6 AND HV03;
HV4:= COUNT(HV00,8)>=3 AND COUNT(HV01 OR HV02,7)<=2 AND HHVBARS(HIGH,8) = 2 AND LLVBARS(LOW,8) >= 7 AND HV04;
HV5:= COUNT(HV00,8)>=3 AND COUNT(HV01 OR HV02,7)<=2 AND HHVBARS(HIGH,8) = 1 AND LLVBARS(LOW,8) >= 7 AND HV03;
HV6:= COUNT(HV00,9)>=3 AND COUNT(HV01 OR HV02,8)<=3 AND HHVBARS(HIGH,9) = 2 AND LLVBARS(LOW,9) >= 8 AND HV04;
HV7:= COUNT(HV00,9)>=3 AND COUNT(HV01 OR HV02,8)<=3 AND HHVBARS(HIGH,9) = 1 AND LLVBARS(LOW,9) >= 8 AND HV03;
HV8:= COUNT(HV00,10)>=3 AND COUNT(HV01 OR HV02,9)<=4 AND HHVBARS(HIGH,10) = 2 AND LLVBARS(LOW,10) >= 9 AND HV04;
HV9:= COUNT(HV00,10)>=3 AND COUNT(HV01 OR HV02,9)<=4 AND HHVBARS(HIGH,10) = 1 AND LLVBARS(LOW,10) >= 9 AND HV03;
HV10:= COUNT(HV00,11)>=3 AND COUNT(HV01 OR HV02,10)<=5 AND HHVBARS(HIGH,11) = 2 AND LLVBARS(LOW,11) >= 10 AND HV04;
HXG:=HV1 OR HV2 OR HV3 OR HV4 OR HV5 OR HV6 OR HV7 OR HV8 OR HV9 OR HV10;
DRAWTEXT(FILTER(HXG=1,3),H*1.02,'顶分型');