通达信macd买点变色指标公式

① 有哪个高手帮我把通达信macd改个公式颜色

{没有源码，只能类似了}

DIF:EMA(CLOSE,12)-EMA(CLOSE,26);

DEA:EMA(DIF,9),COLORYELLOW;

MACD:(DIF-DEA)*2,COLORSTICK;

STICKLINE(MACD>=0 AND MACD>=REF(MACD,1),0,MACD,1,0),COLORRED;

STICKLINE(MACD>=0 AND MACD<=REF(MACD,1),0,MACD,1,0),COLORGREEN;

STICKLINE(MACD<=0 AND MACD>=REF(MACD,1),0,MACD,1,0),COLORFF00FF;

STICKLINE(MACD<=0 AND MACD<=REF(MACD,1),0,MACD,1,0),COLOR00FFFF;

多转空:=((((LLV(MACD,4)>0) AND (MACD<REF(MACD,1))) AND (REF(MACD,1)>REF(MACD,2))) AND (REF(MACD,2)>REF(MACD,3)));

空转多:=((((HHV(MACD,4)<0) AND (MACD>REF(MACD,1))) AND (REF(MACD,1)<REF(MACD,2))) AND (REF(MACD,2)<REF(MACD,3)));

DRAWICON(多转空,MACD,2);

DRAWICON(空转多,MACD,1);

CD:MACD,COLORCYAN;

涨CD:IF(CD>REF(CD,1),CD,DRAWNULL),COLORRED,LINETHICK2;

涨DIF:IF(DIF>REF(DIF,1),DIF,DRAWNULL),COLORRED,LINETHICK2;

多空分界线:0,COLORGREEN;

② 通达信公式，能改成选股指标么（黄色必买，绿色必买）

必买: IF(TROUGHBARS(3,15,1)=0 AND HIGH>LOW+0.01,1,-0),COLORYELLOW ,LINETHICK2;
必卖来: IF(PEAKBARS(3,15,1)=1,1,-0),COLORGREEN,LINETHICK2;

输出源必买: 如果收盘价15%之字转向的前1个波谷位置=0ANDHIGH>最低价+0.01,返回1,否则返回-0,画黄色 ,线宽为2
输出必卖: 如果收盘价15%之字转向的前1个波峰位置=1,返回1,否则返回-0,画绿色,线宽为2

呵呵，你这个公式是他们做着玩的。
两个信号看起来很厉害，其实是之字转向的未来函数，假的，没用的信号。

③ 请高手编写个通达信的简单公式：MACD红绿柱子背离

MACD顶底背离（同时包含KDJ背离，RSI背离）
公式如下：

DIFF:EMA(CLOSE,12) - EMA(CLOSE,26);
DEA:EMA(DIFF,9);
MACD:2*(DIFF-DEA),COLORSTICK;
A1:=BARSLAST(REF(CROSS(DIFF,DEA),1));
B1:=REF(C,A1+1)>C AND REF(DIFF,A1+1)<DIFF AND CROSS(DIFF,DEA);
A2:=BARSLAST(REF(CROSS("KDJ.K"(9,3,3),"KDJ.D"(9,3,3)),1));
B2:=REF(C,A2+1)>C AND REF("KDJ.K"(9,3,3),A2+1)<"KDJ.K"(9,3,3) AND CROSS("KDJ.K"(9,3,3),"KDJ.D"(9,3,3));
A3:=BARSLAST(REF(CROSS("RSI.RSI1"(6,12,24),"RSI.RSI2"(6,12,24)),1));
B3:=REF(C,A3+1)>C AND REF("RSI.RSI1"(6,12,24),A3+1)<"RSI.RSI1"(6,12,24) AND CROSS("RSI.RSI1"(6,12,24),"RSI.RSI2"(6,12,24));
C1:=BARSLAST(REF(CROSS(DEA,DIFF),1));
D1:=REF(C,C1+1)<C AND REF(DIFF,C1+1)>DIFF AND CROSS(DEA,DIFF);
C2:=BARSLAST(REF(CROSS("KDJ.D"(9,3,3),"KDJ.K"(9,3,3)),1));
D2:=REF(C,C2+1)<C AND REF("KDJ.K"(9,3,3),C2+1)>"KDJ.K"(9,3,3) AND CROSS("KDJ.D"(9,3,3),"KDJ.K"(9,3,3));
C3:=BARSLAST(REF(CROSS("RSI.RSI2"(6,12,24),"RSI.RSI1"(6,12,24)),1));
D3:=REF(C,C3+1)<C AND REF("RSI.RSI1"(6,12,24),C3+1)>"RSI.RSI1"(6,12,24) AND CROSS("RSI.RSI2"(6,12,24),"RSI.RSI1"(6,12,24));
MACD底背:IF(B1>0,-0.1,0),COLORRED,POINTDOT;
KDJ底背:IF(B2>0,-0.1,0),COLORFF00FF,POINTDOT;
RSI底背:IF(B3>0,-0.1,0),COLORYELLOW,POINTDOT;
MACD顶背:IF(D1>0,0.1,0),COLOR00FF00,POINTDOT;
KDJ顶背:IF(D2>0,0.1,0),COLORFFCC66,POINTDOT;
RSI顶背:IF(D3>0,0.1,0),COLORWHITE,POINTDOT;
STICKLINE(B1>0,-0.1,0,2,0),COLORRED;
STICKLINE(B2>0,-0.1,0,2,0),COLORFF00FF;
STICKLINE(B3>0,-0.1,0,2,0),COLORYELLOW;
STICKLINE(D1>0,0.1,0,2,0),COLOR00FF00;
STICKLINE(D2>0,0.1,0,2,0),COLORFFCC66;
STICKLINE(D3>0,0.1,0,2,0),COLORWHITE;

④ 求通达信K线和MACD背离时，MACD指标就变色或出现记号的码原。。。。

{这都是答过的问题,网上搜搜};
DIFF:EMA(CLOSE,12)-EMA(CLOSE,26);
DEA:EMA(DIFF,9);
MACD:2*(DIFF-DEA),COLORSTICK,LINETHICK2;
A1:=BARSLAST(REF(CROSS(DIFF,DEA),1));
底背离专:=REF(CLOSE,A1+1)>CLOSE AND DIFF>REF(DIFF,A1+1) AND CROSS(DIFF,DEA);
底背:DRAWLINE(A1=0,DEA,底背离,DEA,0),COLORRED,LINETHICK2;
A2:=BARSLAST(REF(CROSS(DEA,DIFF),1));
顶背属离:=REF(CLOSE,A2+1)<CLOSE AND REF(DIFF,A2+1)>DIFF AND CROSS(DEA,DIFF);
顶背:DRAWLINE(A2=0,DEA,顶背离,DEA,0),COLORGREEN,LINETHICK2;

⑤ 怎样修改公式把通达信MACD红绿柱变粗

参数还是MACD原来的参数，保持不变，你自己重新输入。

新公式1 如下：
DIF:EMA(CLOSE,SHORT)-EMA(CLOSE,LONG);
DEA:EMA(DIF,MID);
MACD:(DIF-DEA)*2,COLORSTICK;

STICKLINE(DIF>DEA,MACD,0,1,0),COLOR0000FF;
STICKLINE(DIF<DEA,MACD,0,1,0),COLOR008000;
STICKLINE(DIF=DEA,MACD,0,1,0),COLOR000000;

如果希望更粗的话，公式2 如下：
DIF:EMA(CLOSE,SHORT)-EMA(CLOSE,LONG);
DEA:EMA(DIF,MID);
MACD:(DIF-DEA)*2,COLORSTICK;

STICKLINE(DIF>DEA,MACD,0,2,0),COLOR0000FF;
STICKLINE(DIF<DEA,MACD,0,2,0),COLOR008000;
STICKLINE(DIF=DEA,MACD,0,2,0),COLOR000000;

{ 把以上你满意的任一个公式直接粘贴到新公式中 或 覆盖原来的MACD公式也行，我已检测过，没有问题，希望能达到你的要求。 }

⑥ 求通达信公式：macd选股公式

DIF:=EMA(CLOSE,12)-EMA(CLOSE,26);

DEA:=EMA(DIF,9);

MACD:=(DIF-DEA)*2;

X1:DIF>REF(DIF,1) AND V>=MA(V,50),COLORRED;

X2:MACD<REF(MACD,1),COLORGREEN;

这样的条件设计会信号过多,而且,出现两专条件重叠情况属.

⑦ 通达信软件里MACD金叉死叉用红色和绿色小箭头表示的公式

一、DIF：EMA(CLOSE,12)-EMA(CLOSE,26)；

DEA：EMA(DIF,9)；

MACD：(DIF-DEA)*2,COLORSTICK；

DRAWICON(CROSS(DIF,DEA),DIF,1)；

DRAWICON(CROSS(DEA,DIF),DEA,2)；

DRAWTEXT(CROSS(DIF,DEA),DIF,'金叉'),COLORRED；

DRAWTEXT(CROSS(DEA,DIF),DEA,'死叉'),COLORGREEN；

{技术指标公式，副图用，已测试}

二、DIF：=EMA(CLOSE,12)-EMA(CLOSE,26)；

DEA：=EMA(DIF,9)

ENTERLONG

cross(dif,dea)；

EXITLONG

cross(dea,dif)；

注：一般的程序的确没什么用，只有比较精确的程序，加上正确的方法，才有用。

(7)通达信macd买点变色指标公式扩展阅读：

1、当DIF和DEA均大于0,并且DIF向上突破DEA时，并向上移动时，一般表示为行情处于多头行情中，可以买入开仓或多头持仓;

2、当DIF和DEA均小于0，并且DIF向下跌破DEA时，并向下移动时，一般表示为行情处于空头行情中，可以卖出开仓。

3、当DIF和DEA均大于0，并且DIF向下跌破DEA时，并向下移动时，一般表示为行情处于下跌阶段，可以卖出开仓和观望;

4、当DIF和DEA均小于0时，并且DIF向上突破DEA时，但向上移动时，一般表示为行情即将上涨，股票将上涨，可以买入开仓或多头持仓。

⑧ 求变色MACD指标代码通达信变色MACD指标和博易大师变色MACD指标，谢谢朋友们！

1、通达信变色MACD指标
DIFIF1:=EMA(C,12) - EMA(C,26);
DEAEA1:=EMA(DIFIF1,9);
MACD1:=2*(DIFIF1-DEAEA1),STICK;
MACD2:=EMA(MACD1,3);
STICKLINE(MACD1>MACD2 AND MACD1>0,0,MACD1,1,0),COLORRED;
STICKLINE(MACD1>MACD2 AND MACD1<0,0,MACD1,1,0),COLORGREEN;
STICKLINE(MACD1<MACD2,0,MACD1,1,0),COLORCBCBC0;
STICKLINE(MACD1>=0 OR MACD1<=0,0,0,50,1),COLORWHITE;
DIFIF1,COLORFFFFFF,LINETHICK2;
DEAEA1,COLORYELLOW,LINETHICK2;
MACD:MACD1,NODRAW,COLORMAGENTA;
上升:IF(DEAEA1>REF(DEAEA1,1),DEAEA1,DRAWNULL),COLORYELLOW,LINETHICK2;
下降:IF(DEAEA1<REF(DEAEA1,1),DEAEA1,DRAWNULL),COLOR227700,LINETHICK2;
上翘:IF(DIFIF1>REF(DIFIF1,1),DIFIF1,DRAWNULL),COLORFFFFFF,LINETHICK2;
下拐:IF(DIFIF1<REF(DIFIF1,1),DIFIF1,DRAWNULL),COLOR227700,LINETHICK2;
DRAWICON(CROSS(DIFIF1,DEAEA1),DEAEA1*1.00,5);
DRAWICON(CROSS(DEAEA1,DIFIF1),DEAEA1*1.00,6);

2、博易大师变色MACD指标
DIFIF1:=EMA(C,12)-EMA(C,26);
DEAEA1:=EMA(DIFIF1,9);
MACD1:=2*(DIFIF1-DEAEA1),STICK;
MACD:2*(DIFIF1-DEAEA1),COLORSTICK;
PARTLINE(DEAEA1>REF(DEAEA1,1),DEAEA1),COLORYELLOW,LINETHICK2;
PARTLINE(DEAEA1<REF(DEAEA1,1),DEAEA1),COLOR008800,LINETHICK2;
PARTLINE(DIFIF1>REF(DIFIF1,1),DIFIF1),COLORFFFFFF,LINETHICK2;
PARTLINE(DIFIF1<REF(DIFIF1,1),DIFIF1),COLOR008800,LINETHICK2;
DRAWICON(CROSS(DIFIF1,DEAEA1),DEAEA1*1.00,1);
DRAWICON(CROSS(DEAEA1,DIFIF1),DEAEA1*1.00,2);

⑨ 通达信MACD公式，请高手请把下面指标公式里的金叉死叉+个箭头表示谢谢

DIFF:EMA(CLOSE,12)-EMA(CLOSE,26);
DEA:EMA(DIFF,9);
MACD:2*(DIFF-DEA), COLORSTICK,LINETHICK2;
低位金叉:=CROSS(DIFF,DEA) AND DIFF<-0.1;
STICKLINE(低位金叉,0,0.08,6,0),COLORYELLOW;
JCCOUNT:=COUNT(CROSS(DIFF,DEA),BARSLAST(DEA>=0));
二次金叉:=CROSS(DIFF,DEA) AND DEA<0 AND COUNT(JCCOUNT=2,21)=1;
STICKLINE(二次金叉,0,0.06,6,0),COLORFF00FF;
DRAWICON(二次金叉,DEA*0.9,1) ;
DRAWTEXT(二次金叉,0.1,' 二次金叉'),COLORYELLOW;
DRAWICON(CROSS(DIFF,DEA),DEA*1.02,1);
DRAWICON(CROSS(DEA,DIFF),DIFF*0.98,2);
A1:=BARSLAST(REF(CROSS(DIFF,DEA),1));
底背离:=REF(CLOSE,A1+1)>CLOSE AND DIFF>REF(DIFF,A1+1) AND CROSS(DIFF,DEA) AND DIFF<0;
STICKLINE(底背离,0,0.03,6,0),COLOR00FF00;
底背:DRAWLINE(A1=0,DEA,底背离,DEA,0),COLORRED,LINETHICK4;
DRAWTEXT(底背离,DIFF,' 底背离'),COLORFF00FF;
A2:=BARSLAST(REF(CROSS(DEA,DIFF),1));
顶背离:=REF(CLOSE,A2+1)<CLOSE AND REF(DIFF,A2+1)>DIFF AND CROSS(DEA,DIFF);
顶背:DRAWLINE(A2=0,DEA,顶背离,DEA,0),COLORGREEN,LINETHICK4;