主力全部控盘指标公式

⑴ 有没有看主力是否控盘的指标公式

没有 去看季报的股东人数变化 越来越少 就证明是主力从散户手里吸收了足够多的筹码
如果越来越多 是主力把股票都出给散户了

⑵ 请高手给我把通达信主力控盘公式改成选出开始控盘的选股公式

VAR1:=EMA(EMA(CLOSE,9),9);
控盘:=(VAR1-REF(VAR1,1))/REF(VAR1,1)*1000;
开始控盘:CROSS(控盘,0);

测试通过，
希望能够帮助你！

⑶ 求经传软件主力控盘指标公式，主力状态公式,拜谢！！

主力控盘 公式 :

N:=35;M:=35;N1:=3;
B1:=(HHV(H,N)-C)/(HHV(H,N)-LLV(LOW,N))*100- M;
B2:=SMA(B1,N,1)+100;
B3:=(C-LLV(L,N))/(HHV(H,N)- LLV(L,N))*100;
B4:=SMA(B3,3,1);
B5:=SMA(B4,3,1)+100;
B6:=B5-B2;
控盘程回度答:(IF(B6>N1,B6-N1+2,0))*2.5,COLORYELLOW;
控盘度:100,COLORRED;
STICKLINE( 控盘程度,0,控盘程度 ,1.7,0 ),COLOR00FFFF;
STICKLINE( 控盘程度 AND 控盘程度>100,100,控盘程度 ,1.7,0 ),COLORRED;

⑷ 求经传软件主力控盘指标公式，主力状态公式

主力控盘

N:=35;M:=35;N1:=3;

B1:=(HHV(H,N)-C)/(HHV(H,N)-LLV(LOW,N))*100- M;

B2:=SMA(B1,N,1)+100;

B3:=(C-LLV(L,N))/(HHV(H,N)- LLV(L,N))*100;

B4:=SMA(B3,3,1);

B5:=SMA(B4,3,1)+100;

B6:=B5-B2;

控盘程度:(IF(B6>N1,B6-N1+2,0))*2.5,COLORYELLOW;

控盘度:100,COLORRED;

STICKLINE( 控盘程度,0,控盘程度 ,1.7,0 ),COLOR00FFFF;

STICKLINE( 控盘程度 AND 控盘程度>100,100,控盘程度 ,1.7,0 ),COLORRED;

主力状态

ZLCM:=EMA(WINNER(CLOSE)*70,3);{//主力筹码估算}

SHCM:=EMA((WINNER(CLOSE*1.1)-WINNER(CLOSE*0.9))*80,3);{//散户筹码估算}

ZSHTL:=SHCM/(ZLCM+SHCM)*100;{//散户套牢筹码比率}

ZZLKP:=ZLCM/(ZLCM+SHCM)*100;{//主力控盘筹码比率}

ZCMZL:=MA(ZLCM+SHCM,13);{//市场筹码总量}

ZZNTS:=BARSLAST(ZSHTL<90 AND REF(ZSHTL,1)>90);{//走牛天数}

ZSHJJ:=EMA(ZSHTL,89);{//散户警戒}

ZZLJJ:=EMA(ZZLKP,89);{//主力警戒}

ZJLRQD:=INTPART(ZZLKP-ZZLJJ);{//资金流入强度}

SH8:=EMA(ZSHTL,8);

DKB:=IF(ZZLKP-REF(ZZLKP,1)>ZSHTL-REF(ZSHTL,1),1,0);

{散户套牢筹码}

STICKLINE(C>0,ZSHTL,ZZLKP,1,0),COLORFFFFFF;

{散户筹码警戒}

STICKLINE(ZSHJJ>REF(ZSHJJ,1),ZSHTL,ZSHJJ,2,0),COLOR00FF00;

{主力控盘筹码}

STICKLINE(C>0,ZZLKP,0,1,0),COLORA4A4A4;

{筑顶风险区}

STICKLINE(ZZLKP>75,ZZLKP,0,1,0),COLORFFFFFF;

{顶部:(ZZLKP>75),COLORFFFFFF;}

{主力筹码警戒}

STICKLINE(ZZLJJ>REF(ZZLJJ,1),ZZLKP,ZZLJJ,2,0),COLORRED;

{筑底散兵坑}

STICKLINE(ZSHTL>=90,ZZLKP,0,2,0),COLOR66FFCC;

{底部:(ZSHTL>=90),COLOR66FFCC;}

{筹码总量上升}

IF(ZCMZL,ZCMZL>REF(ZCMZL,1),0),COLOR0066FF,LINETHICK1;

(4)主力全部控盘指标公式扩展阅读：

{//------【数值显示】}

散户套牢系数:INTPART(ZSHTL),COLORCYAN,LINETHICK2;

主力控盘系数:INTPART(ZZLKP),COLORYELLOW,LINETHICK2;

资金流入强度:ZJLRQD,LINETHICK2,COLORRED;

资金流入强度2:IF(ZJLRQD<10,ZJLRQD,0),LINETHICK2,COLORWHITE;

市场筹码总量:INTPART(ZCMZL),COLORWHITE,LINETHICK0;

DRAWICON(CROSS(主力控盘系数,散户套牢系数),散户套牢系数-5,11)。

⑸ 请帮助修改通达信主力控盘选股公式，谢谢

以下是修改过的，按问题要求做的主力控盘选股公式，用软件实际测试过能达到要求，可以使用：
VUR1:=VOL/CAPITAL;
VUR2:=1.1*(MAX(HIGH,REF(CLOSE,1))/MIN(LOW,REF(CLOSE,1))-1);
VUR3:=2.5*MAX(VUR1,VUR2);
VUR4:=DMA(CLOSE,VUR3);
VUR5:=20*(VUR4/REF(VUR4,1)-1)*38;
VUR6:=EMA(VUR5,3);
VUR7:=EMA(VUR5,3);
VUR8:=EMA(VUR7,5);
VURS:=EMA(VUR7,8);
VUR9:=1.1*(MAX(INDEXH,REF(INDEXC,1))/MIN(INDEXL,REF(INDEXC,1))-1);
VURA:=2.5*MAX(VUR1,VUR9);
VURB:=DMA(INDEXC,VURA);
VURC:=EMA(20*(VURB/REF(VURB,1)-1),1)*38;
VURD:=EMA(VURC,2);
VURE:=EMA(VURC,2);
DX1:=VURE;
DX2:=VURS;
DX3:=VUR8;
DX4:=VUR7;
ZMIN:CROSS(VUR7,20);

⑹ 通达信指标高度控盘（公式如下），求大神编写一个通达信选股公式

搜一下：通达信指标高度控盘（公式如下），求大神编写一个通达信选股公式

⑺ 请高手把通达信的这条主力资金（开始控盘、控盘、主力出货、主力吸货）指标公式源码改为可以在同花顺上使

VAR2:=(((CLOSE - MA(CLOSE,6)) / MA(CLOSE,6)) * 100);
VAR3:=(((CLOSE - MA(CLOSE,12)) / MA(CLOSE,12)) * 100);
VAR4:=(((CLOSE - MA(CLOSE,24)) / MA(CLOSE,24)) * 100);
VAR5:=(((VAR2 + (2 * VAR3)) + (3 * VAR4)) / 6);
VAR6:=MA(VAR5,3);
开始控盘:=STICKLINE((VAR6 <= (0 - 10)),0,(0 - 20),3.5,0),COLOR00AAFF;
STICKLINE((VAR6 <= (0 - 10)),0,(0 - 20),3.5,0),COLOR0044FF;
STICKLINE((VAR6 <= (0 - 10)),0,(0 - 20),2.5,0),COLOR0088FF;
STICKLINE((VAR6 <= (0 - 10)),0,(0 - 20),3,0),COLOR00AAFF;
VAR1:=EMA(EMA(CLOSE,3),1);
控盘:=(VAR1-REF(VAR1,1))/REF(VAR1,1)*1000;
STICKLINE(控盘<0,控盘,0,3.5,0),COLORFFAA00;
STICKLINE(控盘<0,控盘,0,3.5,2,0,),COLORFF4400;
STICKLINE(控盘<0,控盘,0,2.5,0),COLORFF8800;
STICKLINE(控盘<0,控盘,0,0,0),COLORFFAA00;
主力出货:0,COLORFFAA00;
STICKLINE(控盘>REF(控盘,3) AND 控盘>0,控盘,0,3.5,0),COLOR000088;
STICKLINE(控盘>REF(控盘,3) AND 控盘>0,控盘,0,2.5,0),COLOR0000AA;
STICKLINE(控盘>REF(控盘,3) AND 控盘>0,控盘,0,1.5,0),COLOR0000CC;
STICKLINE(控盘>REF(控盘,3) AND 控盘>0,控盘,0,1,0),COLOR0000EE;
主力吸货:0,COLOR0000FF;
STICKLINE(控盘<REF(控盘,3) AND 控盘>0,控盘,0,3.5,0),COLOR008800;
STICKLINE(控盘<REF(控盘,3) AND 控盘>0,控盘,0,2.5,0),COLOR00AA00;
STICKLINE(控盘<REF(控盘,3) AND 控盘>0,控盘,0,1.5,0),COLOR00CC00;
STICKLINE(控盘<REF(控盘,3) AND 控盘>0,控盘,0,1,0),COLOR00EE00;
对倒出货洗盘:0,COLOR00FF00;
黄色底部吸货:0,coloryellow;
DRAWTEXT(CROSS(控盘,0),0-3,'买。追'),COLORFF00FF;
DRAWTEXT(CROSS(0,控盘),0-0,'卖'),colorgreen;
{去除了收费专用函数和未来函数部分}

⑻ 请高手把通达信的这条主力资金（开始控盘、控盘、主力出货、主力吸货）指标公式源码改为可在大智慧上使用

VAR2:=(((CLOSE - MA(CLOSE,6)) / MA(CLOSE,6)) * 100);

VAR3:=(((CLOSE - MA(CLOSE,12)) / MA(CLOSE,12)) * 100);

VAR4:=(((CLOSE - MA(CLOSE,24)) / MA(CLOSE,24)) * 100);

VAR5:=(((VAR2 + (2 * VAR3)) + (3 * VAR4)) / 6);

VAR6:=MA(VAR5,3);

开始控盘:(VAR6 <= (0 - 10)),COLOR00AAFF;

STICKLINE((VAR6 <= (0 - 10)),0,(0 - 20),3.5,0),COLOR00AAFF;

STICKLINE((VAR6 <= (0 - 10)),0,(0 - 20),3.5,0),COLOR0044FF;

STICKLINE((VAR6 <= (0 - 10)),0,(0 - 20),2.5,0),COLOR0088FF;

STICKLINE((VAR6 <= (0 - 10)),0,(0 - 20),3,0),COLOR00AAFF;

VAR1:=EMA(EMA(CLOSE,3),1);

控盘:=(VAR1-REF(VAR1,1))/REF(VAR1,1)*1000;

STICKLINE(控盘<0,控盘,0,3.5,0),COLORFFAA00;

STICKLINE(控盘<0,控盘,0,3.5,0),COLORFF4400;

STICKLINE(控盘<0,控盘,0,2.5,0),COLORFF8800;

STICKLINE(控盘<0,控盘,0,0,0),COLORFFAA00;

主力出货:0,COLORFFAA00;

STICKLINE(控盘>REF(控盘,3) AND 控盘>0,控盘,0,3.5,0),COLOR000088;

STICKLINE(控盘>REF(控盘,3) AND 控盘>0,控盘,0,2.5,0),COLOR0000AA;

STICKLINE(控盘>REF(控盘,3) AND 控盘>0,控盘,0,1.5,0),COLOR0000CC;

STICKLINE(控盘>REF(控盘,3) AND 控盘>0,控盘,0,1,0),COLOR0000EE;

主力吸货:0,COLOR0000FF;

STICKLINE(控盘<REF(控盘,3) AND 控盘>0,控盘,0,3.5,0),COLOR008800;

STICKLINE(控盘<REF(控盘,3) AND 控盘>0,控盘,0,2.5,0),COLOR00AA00;

STICKLINE(控盘<REF(控盘,3) AND 控盘>0,控盘,0,1.5,0),COLOR00CC00;

STICKLINE(控盘<REF(控盘,3) AND 控盘>0,控盘,0,1,0),COLOR00EE00;

STICKLINE("DDX.DDX"<0,0,"DDX.DDX",3.5,0),COLOR008800;

STICKLINE("DDX.DDX"<0,0,"DDX.DDX",2.5,0),COLOR00AA00;

STICKLINE("DDX.DDX"<0,0,"DDX.DDX",1.5,0),COLOR00CC00;

STICKLINE("DDX.DDX"<0,0,"DDX.DDX",1,0),COLOR00EE00;

对倒出货洗盘:0,COLOR00FF00;

黄色底部吸货:0,COLORYELLOW;

DRAWTEXT(CROSS(控盘,0),0-3,'买。追'),COLORFF00FF;

DRAWTEXT(CROSS(0,控盘),0-0,'卖'),COLORGREEN;

DATA:=5;

{多头买入} DRAWICON(ZIG(3,DATA)>REF(ZIG(3,DATA),1)

AND REF(ZIG(3,DATA),1)<=REF(ZIG(3,DATA),2)

AND REF(ZIG(3,DATA),2)<=REF(ZIG(3,DATA),3),L*0.98,7);

{多头卖出} DRAWICON(ZIG(3,DATA)<REF(ZIG(3,DATA),1)

AND REF(ZIG(3,DATA),1)>=REF(ZIG(3,DATA),2)

AND REF(ZIG(3,DATA),2)>=REF(ZIG(3,DATA),3),H*1.02,8);

⑼ 通达信主力控盘指标公式修改

B1:=(HHV(H,N)-C)/(HHV(H,N)-LLV(LOW,N))*100- M;
B2:=SMA(B1,N,1)+100;
B3:=(C-LLV(L,N))/(HHV(H,N)- LLV(L,N))*100;
B4:=SMA(B3,3,1);
B5:=SMA(B4,3,1)+100;
B6:=B5-B2;
控盘程度:(IF(B6>N1,B6-N1,0))*2.5,COLORYELLOW;
控盘度:100,COLORRED;
STICKLINE( 控盘程度,0,控盘程度 ,3,0 ),COLOR00FFFF;
STICKLINE( 控盘程度 AND 控盘程度>100,100,控盘程度 ,3,0 ),COLORRED;
整个公式中缺少内参数，“容N”"M" "N1" 这三个参数没有赋值，所以是错误的。